Starting the journey to the perfect bathroom setup is key. It means understanding precision plumbing. This includes knowing the rough in size, crucial for toilet installation. The main point is simple – getting the right rough in size needs careful attention.
The heart of a perfect bathroom setup is the rough-in size. This measurement is vital. It makes sure the toilet installation goes smoothly. People often overlook it. But knowing the standard 12-inch size, and its 10-inch variants, avoids future mistakes.
Definition of Rough-In Size of a Toilet
What is rough-in size of a toilet? The rough in size measures how far the toilet's bolts or drainpipe are from the wall. It tells us which toilets will fit without big changes needed.
Beneath the Surface: the Crucial Role of Rough-In Size
The rough-in size is super important when redoing a bathroom. It affects how everything looks and works, especially the toilet. Get it wrong, and you might end up with things looking off or not working right.
Ensure Proper Fit
Getting the rough-in size right, is key to a successful bathroom build. It keeps the plumbing organized, and makes sure everything fits properly. If things don't line up, you could face leaks, or things not working, as they should. Experts in roughing-in always emphasize, how critical this step is, for everything to go smoothly afterwards.
Avoid Gaps
Messing up the rough-in size can cause problems, like ugly gaps between the toilet and wall. These gaps look bad and make cleaning tough, which is a hygiene issue. Good rough-in work means no gaps, making everything look neat and work better.
Save Time and Money
Right rough-in measurements are crucial for saving both time and money, in construction projects. Accurate measurements ensure that all component fit perfectly, reducing the need for adjustments and rework. When measurements are incorrect, it leads to a cascade of problems:
|
Increased Workload |
Incorrect rough-in size measurements often require additional labor, to correct the mistakes.This can involve cutting, and fitting materials again, which is both time-consuming and costly. Sometimes you may need to choose a new toilet. |
|
Higher Costs |
The cost of fixing measurement errors includes not only the price of additional materials but also the labor costs associated with the extra work. In some cases, specialized tools, or equipments may be required, to make correction, further adding to the expenses. |
Common Rough-In Sizes of a Toilet
When redoing a bathroom, knowing the common rough-in sizes is key. The right choice, like picking HOROW, is important. This choice affects the room and fit for your toilet. It is vital for a smooth install and a well-designed bathroom.
12-Inch Rough-In: Standard Size
The 12-inch size is what most homes use, making it a standard. It fits many HOROW toilet designs. Its popularity comes from how well it works with different spaces. It's great for both new homes and remodels.
Recommend: HOROW 12-inch toilets
If you are looking for a smart toilet with 12-inch rough in size, you can choose HOROW T16 to fit your need. HOROW T16 is a tankless smart toilet with 3 modes of washing. They are rear wash, front wash and movable wash. For warmth and comfort in winter, its adjustable water temperature and pressure make your dream come true! The 316 stainless steel nozzle is a self-cleaning nozzle. You should never worry about any hassle as it keeps your bathroom hygienic all the time. Its soft close feature ensures no slamming of the seat, which is perfect for those who hate noise.
If you prefer a one-piece toilet, HOROW T0338W can be your best choice. HOROW T0338W is an elongated one piece toilet. With comfort chair seat ADA height 17.3", it is loved by the elderly and disabilities for easy sitting and standing. More importantly, it has a powerful flush system with super-quiet siphon dual flush 0.8/1.28GPF. Its MAP 1000g passed MISO (Multiple-Input Single-Output) test. This makes toilet flushing effective and easy. With the self-cleaning glazed surface, it is easy to maintain a clean bowl for an extended period. Inside the toilet, its clean lines and skirted trapway design require less plumbing to maintain sanitation.
Want a two-piece toilet? Get HOROW HWTT-R01S, and you will be astonished by its functions and styles. It is a single flush toilet. Its 1.28GPF saves water. Its 17.5 inch height toilet bowl (ADA compliant) is great for the elderly and the disabilities. With a rounded bowl, it provides extra room for legs to improve comfort. In addition, it is easy to clean because its 360° jet siphon flushing technology ensures no clogging.
10-Inch Rough-In
For other bathrooms, a 10-inch rough-in may be perfect. HOROW has models just for these sizes. For 10-inch rough in toilets, HOROW also has diverse products catering to your preference.
Recommend: HOROW 10-inch toilets
Smart toilets
For smart toilets, HOROW T37 with bidet seat offers a wide range of functions . It is designed to enhance your comfort and hygiene. This advanced toilet model integrate several innovative features that make daily use more pleasant and convenient. Here are some of the key benefit and functionalities of the HOROW T37:
|
Features |
Benefits |
|
Electronic Bidet Functionality |
The HOROW T37 is equipped with an electronic bidet system, that provides a gentle and hygienic cleaning experience.It includes adjustable water temperature,and pressure settings, allowing user to customize the cleaning process, according to their preference.The bidet feature is particularly beneficial, for maintaining personal hygiene. It can be more ecofriendly alternative,to traditional toilet paper. |
|
Heated Seats |
One of the most appreciated features of the HOROW T37,is its heated seat. The seat warms up,to a comfortable temperature.This feature provide a welcoming, and relaxing experience, especially during colder month.The heating function is typically adjustable, allowing users,to set the desired warmth levels. |
|
Automatic Flushing |
HOROW T37 features an automatic flushing mechanism, that ensures the toilet bowl is cleaned,after each uses. This handsfree operation enhances hygiene and convenience, reducing the need for manual intervention. |
|
Built-in Deodorizers |
The built-in deodorizer effectively eliminate unpleasant odor, keeping the bathroom fresh,and clean. This feature is particularly useful, in small,or poorly ventilated bathroom. |
|
SIAA Antimicrobial Certified Seat |
HOROW T37 seat is certified,by SIAA for its antimicrobial properties.This certification ensures that the seat is resistant to bacterias, and other microorganism. This makes it a safe, and hygienic option.The antimicrobial seat is especially beneficial, for individuals, with sensitive or allergyprone skin, including children.It reduce the risk, of skin irritation and infection, and provide added layer, of protection. |
|
Additional Comfort and Convenience Features |
HOROW T37 also includes other features, such as, a softclose lid, which prevents the lid, from slamming shut,and creating noise. |
|
Environmental Impact |
HOROW T37 is an environmentally friendly choice. The bidet function reduces the need for toilet paper, which can help lower paper waste, and the associated environmental impact. The efficient water usage and automatic flushing mechanisms, contribute to water conservation, making the toilet a sustainable option, for modern homes. |
By choosing the HOROW T37 smart toilet, you can enjoy a combination of advanced technology, enhanced hygiene, and userfriendly design.It is an excellent investment, for anyone looking to upgrade their bathroom.This modern and functional toilet caters to the needs, of all family members.
One-piece toilets
For one-piece toilets, HOROW T0338B-10 with 10-inch rough in size is a good choice. It is a black toilet with elegance. This style is designed for a modern and simple bathroom. It offers a more decorative change. With a height of over 17.3" (ADA comfortable height) and elongated bowl design, HOROW T0338B-10 provides added comfort. Its tensioned hinges ensure a soft close,to ensure that each use of the toilet does not cause embarrassing and disturbing noise. It has a MAP flush score of up to 1,000g. Therefore, you don’t need to worry about any clog with this black one-piece toilet.
Knowing these sizes helps plan your bathroom plumbing. Whether you go with a 12-inch or a 10-inch, HOROW has you covered. Always measure correctly and follow building codes for the best results.
How to Measure the Rough-In Size
Learning how to measure the rough-in size of your bathroom, for a new toilet is easy with a few steps. You'll save time and dodge installation problems. Getting the rough-in size right is key, especially when swapping an old toilet, or putting in a new one, after remodeling. Let's walk through,what you need to do.
Remove the Existing Toilet
First up, take out the current toilet to see the floor, and walls near the toilet drain. This is important because it reveals the bolt holes or the drainpipe center. These spots are crucial, for getting an accurate rough in measurement.
Measure from the Wall to the Bolt Hole or Drain Center
Grab a tape measure, and note the distance from the wall to the drain center, or closet bolt caps. Remember to measure, from the wall itself, not from baseboards or molding. These can skew your numbers. Commonly, you'll find rough-in sizes are 12 inches. Yet, 10-inch or 14-inch sizes also appear, especially in older, or custom bathrooms.
Never Ignore Wall Tile Thickness
If your bathroom is unfinished, or you're planning renovations, don't forget the wall materials' thickness. Leaving out this detail could mean your toilet ends up too close, or too far from the wall, once everything's done.
Getting the rough in right is critical, for both your bathroom's look and its function. The precise rough in measurement makes sure the toilet fits perfectly. It also helps with cleanliness, and meets plumbing standards. So, taking these steps seriously, makes a big difference.
Bathroom’s Rough-In Size not Align with the Toilet
When a bathroom’s rough-in dimensions don't match new toilets, homeowners have a big choice to make.This issue can stem from older designs,or custom builds, of homes. Here's how you can effectively tackle these challenges.
Purchase a Toilet with the Correct Rough-In Size
Choosing a toilet that fits your bathroom’s specific rough-in size prevents many problems. While new homes often have a 12-inch rough installation, others may need a 10 or 14-inch model.
Reposition the Drain if You Have an Unusual Rough-In Size Bathroom
If your rough-in size is unusual, like 8 or 9 inches, changing the plumbing may be needed. This change includes tweaking the rough-in position,to fit standard toilets.
Call a Professional Plumber
Getting a professional plumber on board ensures the process is done right and efficiently. They can advise if it’s better to adjust the installation or choose a different toilet model. Plus, they'll make the needed changes accurately.
However, calling an expert can be more time-comsuming and expensive. This means you need good planning and a set budget.
Use a Wall-Mounted Toilet
If aligning with the floor is hard, consider a wall-mounted toilet. Here are some benefits and requirements if you are choosing a wall-mounted toilet.
|
Features |
Benefits |
|
No Need to Align with the Floor Drain |
Wall-mounted toilets are great because they don't need a floor drain. This is very useful,for bathrooms,with unique layouts. |
|
Save Space and Offer a Sleek, Modern Look |
They also make a bathroom, look better,and save space.This makes them perfect, for small or oddly shaped bathrooms. |
|
Require a Sturdy Frame and Proper Installation |
But, these toilets need strong in-wall framing, and careful installation.This is why you need skilled pros, to ensure they last, and work well. |
If you are looking for a wall-mounted toilet, try the following HOROW toilets. Recommend:
HOROW G10 toilet
HOROW G10 toilet is a wall hung bidet toilet with powerful functions and elegant designs. It can save up to 12 inches of space compared to toilets with cisterns.
With multi level adjustable water temperature and pressure, you can choose the perfect setting to suit your preference. It is doubtless that this HOROW G10 toilet will gain your favor!
Moreover, its forward and backward moving stainless steel nozzle can provide the best cleaning solution for different people. In cold weather, the instantaneous heated seat keeps warmth around your hips. The deodorant keeps odor away from your bathroom. Want to enjoy every second at night? Its intelligent LED night light allows you to enter the bathroom with confidence.
HOROW TG02W toilet
HOROW TG02W toilet is a round wall mounted toilet, which can be placed anywhere from 15 inches to 28.5 inches above the ground. For those who want a toilet with powerful flushing system, this toilet is a good options. Its integrated dual-cyclone flushing system and 4 inch all-glass sewage channel will not allow stains left in the toilet bowl. Its wall mounted water tank is seamlessly connected to the wall. In this way it looks stylish and modern.
This wall-mounted toilet is quick and easy to install, with complete accessories and detailed installation instructions provided for your convenience. Therefore, you don’t need to worry about any hassle when buying a new toilet.
With concealed tank and the raised toilet bowl, it is easy to clean underneath. That’s how you can say goodbye to frequent toilet brush use and free up your hands.
Selecting the best wall mounted toilet is difficult? With HOROW toilets, the answer is certainly no! You will find yourself enjoy every moment in the bathroom, and keep hygienic all the time.
Special Considerations for the Rough-In Size of a Toilet
The rough-in size of a toilet must be accurate, for everything that follows. Apart from the above features, there are some special considerations when we are choosing the rough-in size of a toilet. In the following content, we will dive into other factors, to ensure the toilets match with your bathroom layout.
Matching Principle
The rule here is simple, but very important. The toilet's rough-in size must match or be smaller than the actual plumbing rough-in size in the bathroom.
Wall Clearance
Wall clearance is key for maintenance and removing the tank lid. It also affects how you access the toilet over time. When installing, ensure the toilet doesn't block the bathroom door or fixtures. This keeps the bathroom accessible and orderly.
Always check the toilet's spec sheet before installation, noting size variations. Understanding these details is important. HOROW emphasizes the need for innovative solutions. This helps homeowners find toilets that fit their plumbing, despite any space challenges.
FAQ
1. What exactly does “ rough-in size ” mean in toilet installation?
“Rough-in size” is a key measurement, in toilet installation. It's the distance from the wall, to the toilet's floor bolts or drainpipe. This measurement helps make sure the toilet fits well, with the bathroom's plumbing.
2. Why is ensuring the proper rough-in size important?
Getting the rough-in size right is key, for fitting the toilet properly. It helps avoid gaps between the toilet, and wall. It also saves time, effort, and extra costs, from wrong measuring.
3. How do I measure the rough-in size of my bathroom for a new toilet?
First, take out the old toilet. Then, measure from the wall to the closet bolts' center with a tape. Don't include baseboards in this measure. Also, consider the wall tile thickness.
4. Should I call a professional plumber if my bathroom's rough-in size does not match the standard sizes?
If your rough-in size is uncommon, it's wise to call a pro plumber. They can suggest, if it's best to move the drain or pick a special toilet for your bathroom's dimensions.
5. Are wall-mounted toilets a solution for irregular rough-in sizes?
Yes, wall-mounted toilets suit bathrooms with unusual rough-in sizes well. They attach to a frame in the wall and aren't tied to the floor drain's location. This can save you space and give your bathroom a modern look.
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.