A fiberglass tub is one of the most common choices in a bathroom because it’s lightweight and budget-friendly. If you are planning a bathroom update and want something you can carry into the house without a crew of helpers, fiberglass is hard to beat.
But there’s a tradeoff many homeowners only learn after move-in when choosing acrylic or fiberglass for their bathtub. A fiberglass bathtub can start to look “tired” faster than an acrylic bathtub or premium materials. Scratches show up. The shine fades. Stains hang on. In some homes, hairline cracks appear near the drain or in the center of the tub floor.
So is fiberglass “good” or “bad”? It depends on how you use the bathroom, how long you plan to stay in the home, and whether the tub is installed with the right support underneath. This guide gives you the fast answers first, then helps you diagnose wear and choose between repair, refinishing, or replacement.
Fiberglass Tub Quick Verdict Data First
If your main goal is affordability and easy handling, a fiberglass tub can make sense. If your goal is long-term looks and fewer headaches, you may be happier spending more on an acrylic tub or another durable material.
Key Stats That Influence The Decision Cost Weight Lifespan
These ranges vary by model quality, region, and labor rates, but they reflect what many homeowners run into when shopping for a standard alcove tub.
| At-a-glance | Fiberglass tub | Acrylic tub (typical comparison) |
| Typical weight | ~70 lb | ~100 lb |
| Typical lifespan range | 8–12 years to 10–15 years | often longer with good care |
| Upfront cost | usually less expensive | usually higher |
| Heat retention | poorer heat retention | better comfort for long soaks |
| Common wear | scratch, dulling, stains, hairline crack | tends to stay glossy longer |
If you love long hot baths, that heat loss matters. If you mainly take quick showers, you may not care.
Who Should Choose Fiberglass And Who Shouldn’t
A fiberglass tub is often a smart pick when the bathroom is light-use, the budget is tight, or the home has tricky access—especially in standard bathtubs and showers found in guest baths or secondary bathrooms.
Fiberglass tends to fit best in guest baths used once or twice a week, rentals where turnover is expected, and short-horizon remodeling plans where you want a clean, standard-size swap without heavy lifting. It can also be useful for upstairs bathrooms where weight and carrying space matter.
On the other hand, if you have a busy family bath, you bathe kids and pets often, or this is your “forever home” bathroom remodel, fiberglass can feel like a compromise you’ll pay for later. The key point is that heavy daily use speeds up gelcoat wear and makes flexing problems show up sooner.
Most Common Complaints And What They Usually Mean
When people say, “My fiberglass bathtub won’t get clean,” they often mean the surface has changed.
Scratches and a dull or chalky finish usually point to gelcoat wear. Yellowing or staining often happens when the surface becomes more porous, so soap scum and minerals cling harder. Spider-web cracks near the drain often suggest the tub floor is flexing because it wasn’t supported well during installation.
If you remember only one idea, make it this: many fiberglass tub “failures” are not from water being too hot or someone stepping wrong once. They come from repeated flexing over time, plus a thin surface layer that can’t take harsh cleaning.
Is A Fiberglass Tub Good Or Bad
A fiberglass tub is good when you need a cost-effective, lightweight and affordable solution, and you’re okay with a shorter lifespan and more careful cleaning.
A fiberglass tub is not ideal when you want top durability, excellent heat retention, and a finish that stays glossy for many years with normal use.
What A Fiberglass Bathtub Is And Why It Wears Faster
Fiberglass tubs can feel confusing because the word “fiberglass” gets used loosely. Let’s make it simple.
How Fiberglass Tubs Are Made FRP Resin And Gelcoat
Most fiberglass tubs are made from fiberglass-reinforced plastic (FRP). In plain terms, the tub body is built from fine glass fibers (often described as woven glass or chopped strand fibers) that get coated with resin. That fiberglass-and-resin structure gives the tub its shape and strength.
Then the visible surface is finished with a thin gelcoat. Think of gelcoat like a protective “skin” that gives the tub its color and shine, and helps water bead up instead of soaking in.
A simple layer view looks like this:
gelcoat surface → fiberglass/resin body → support/contact points under the base
This explains a lot of real-life behavior. If the gelcoat stays intact, the tub looks bright and cleans easily. As it thins, the tub can look dull and hold stains.
Gelcoat 101 What It Does And What Happens When It Wears
Gelcoat is doing a big job while being very thin. It takes the rubbing from your feet, the scrape from a shampoo bottle, and the cleaning you do every week. Over time, the glossy surface can turn hazy. Once it gets worn enough, it can become more absorbent and harder to “brighten” again.
Many homeowners notice a progression that looks like this: glossy new tub → light haze that returns after cleaning → dull patches that always look dirty → discoloration that doesn’t lift → hairline cracking in areas that flex.
If you are already in the dull-and-stained stage, it’s not that you are “bad at cleaning.” It’s often that the surface is no longer acting like a smooth, protective coat.
Fiberglass Vs Acrylic Vs Fiberglass Reinforced Acrylic Avoiding Confusion
You’ll hear a few similar phrases when shopping for bathtub material:
A fiberglass tub usually means an FRP tub with a gelcoat surface.
An acrylic bathtub is typically made from a thicker acrylic sheet (the part you touch) that’s formed into shape and reinforced underneath. Because the surface layer is thicker, it often resists wearing better over time.
Some tubs are marketed as fiberglass-reinforced acrylic. That often means you’re standing on acrylic, but the underside is reinforced. For day-to-day living, the surface you clean matters most, because that is what scratches and stains.
Here’s a direct comparison that matches what most homeowners feel in use.
| Material | Surface you touch | Scratch resistance | Heat retention feel | Common long-term look |
| Fiberglass bathtub (FRP + gelcoat) | gelcoat | lower | cooler, faster cooling | dulling and stains show sooner |
| Acrylic bathtub | acrylic sheet | better | warmer, better for soak | stays glossy longer |
| Porcelain-on-steel | porcelain enamel | good until chipped | cool, can be noisy | can chip, rust risk at chips |
| Cast iron (enameled) | porcelain enamel | very good | excellent | longest-lasting, very heavy |
How Can I Tell If My Tub Is Fiberglass Or Acrylic
If you just bought a home and the listing didn’t say, you’re not alone. Here are practical checks that usually help.
A fiberglass tub often feels a bit more “hollow” when you tap it, and it may flex slightly underfoot in the center. An acrylic tub often feels more solid and stays warmer to the touch.
If you can access the underside (sometimes through a basement ceiling panel or a plumbing access), fiberglass often shows a rougher backing where glass fibers and resin are visible. Acrylic-backed tubs often have a more uniform reinforced layer under the acrylic shell.
If you’re still unsure, a plumber or remodel contractor can usually identify it quickly once the drain area or access panel is open.
Pros Cons And Best Use Scenarios Real World Focused
You can read a hundred pros-and-cons lists online, but what matters is how the tub behaves in daily life.
Advantages Homeowners Actually Benefit From
The biggest advantage is that fiberglass is inexpensive compared to many options, which can free up budget for better waterproofing, a nicer tub surround, or improved ventilation.
It’s also easy to install and handle, especially compared to heavier bathtub materials. When a home has tight hallways, narrow stairs, or a small bathroom door, a lighter tub can reduce labor time and reduce the chance of wall damage during delivery. For many second-floor bathrooms, that lighter weight is also comforting for homeowners who worry about load, even though a properly framed floor should handle a full bath load.
Fiberglass tubs also make “fast swap” projects easier. If you’re replacing a standard alcove tub and shower combo with the same size, fiberglass can be a simple path to a functional update—and many homeowners also update the enclosure with a modern shower door at the same time.
Disadvantages That Drive Replacement Decisions
Fiberglass’s main disadvantage is that the surface can be easier to damage. A simple gritty cleaning pad can leave fine scratches that catch soap scum. Dropping a heavy bottle can chip the gelcoat. Over time, a worn gelcoat can turn cleaning into a weekly battle that never looks “done.”
The second big drawback is comfort. Fiberglass tends to have poorer heat retention than acrylic and cast iron, so a long bath cools faster. If you are a “quick shower” person, you may not care. If you love a long soak, you may feel it every time.
The third issue is flex. A fiberglass tub that is not set with good support under the base can flex when you stand in it. That flexing can stress the gelcoat and create hairline cracks, especially near the drain where people stand most.
Best Fit Scenarios Owner Occupied Rentals And Flips
Fiberglass often works well when the use is predictable and the goal is simple function.
In a guest bath used once or twice a week, fiberglass can look good for years with gentle cleaning. In a rental property, a lower purchase price can make sense because damage and turnover are part of the reality. In a starter home where you plan to sell in five to seven years, fiberglass can be a practical way to keep a clean bathroom without spending premium money.
If your bathroom is the “main” bath for kids, pets, and daily showers, it’s worth thinking hard about upgrading to acrylic or another durable material. That is where the difference between fiberglass and acrylic tubs shows up most.
Red Flags That Suggest Upgrading Material Instead
If you’ve already had a tub crack in the past, or you remember the old tub feeling “springy,” that’s a warning. If your subfloor has any bounce, if the bathroom has a history of leaks, or if you want a deep soaking bath, those are also signs you may be happier with acrylic or a premium choice like cast iron.
Lifespan And Failure Modes Why Fiberglass Tubs Crack Stain And Dull
Fiberglass tubs fail in predictable ways. This section explains how long they typically last, what shortens their lifespan, and how to recognize early warning signs before damage gets worse.
Lifespan Ranges By Use And Quality Tier What Changes The Outcome
People ask, “What is the lifespan of a fiberglass bathtub?” because they want to know if it’s a smart buy or a temporary fix.
A common real-world range is about 8–12 years on the short end and 10–15 years on the longer end, depending on use and quality. Light-use bathrooms and better-supported installs can push toward the longer side. Heavy daily use, harsh cleaning, and a flexing base can shorten it.
Three drivers matter most. First is gelcoat thickness and quality. Second is how well the tub floor is supported so it doesn’t flex. Third is cleaning habits, especially avoiding abrasive tools that scratch the finish.
The Big Four Fiberglass Tub Problems With Symptoms
Fiberglass tub wear tends to fall into a few patterns. Knowing which one you’re seeing helps you choose the right fix.
Scratches and dulling often show up as haze that returns right after cleaning. If you see lots of fine lines in the reflection, that’s usually surface scratching. It can happen from gritty cleansers, rough pads, or even sand from bare feet after the beach.
Staining and yellowing can look like a tan film or a darker ring around the waterline. Sometimes it is hard water and soap scum that baked in over time. Sometimes it is the gelcoat getting more porous, so the tub holds onto color.
Hairline or spider cracks often appear near the drain, the center where you stand, or near corners where stress concentrates. Tiny cracks can stay cosmetic, but they can also be the start of a bigger failure if the tub floor keeps flexing.
Soft spots and flexing feel like the floor gives a little when you stand in it. This is a support problem first, and a surface problem second. If you patch cracks without fixing flex, new cracks often come back.
A simple “what it means” matrix helps:
| Problem you see | Likely cause | What usually helps |
| Dull/chalky finish | gelcoat worn, micro-scratches | gentle polish or refinish if widespread |
| Stains that won’t lift | surface more porous + buildup | least-aggressive stain plan; refinish if set-in |
| Spider cracks near drain | flexing + stress at standing zone | improve support if possible; repair cracks |
| Soft spot | base not supported or subfloor movement | support fix or replacement |
Heat Retention And Comfort Why It Feels Colder And Cools Faster
Why does fiberglass feel cooler? A fiberglass shell is usually thinner and has less “thermal mass,” meaning it doesn’t hold heat as well. It can also transfer heat away from your bathwater faster than thicker materials. That’s why a long soak can cool down sooner than in an acrylic or cast iron tub.
If soaking is your nightly routine, comfort might be worth paying for. If your bathroom is mostly a shower space, comfort may be less important than ease of install and cost.
How Long Does A Fiberglass Tub Last
In many homes, a fiberglass tub lasts around 10–15 years, with 8–12 years being common in heavy-use settings or with poor support. It can last longer with gentle cleaning and strong base support, and it can fail sooner if it flexes, is cleaned with abrasives, or develops repeated cracks.
Costs Buying Installing Repairing And Owning Over Time
The real cost of a fiberglass tub includes more than the purchase price. This section covers installation, repair, refinishing, and long-term ownership costs to help you budget realistically.
How Much Does A Fiberglass Tub Cost
People usually ask this question because they’re trying to price a whole bathroom remodel, not just the tub shell.
A standard fiberglass bathtub unit is often one of the cheapest tub options. Installed pricing varies widely because labor and “hidden” work can cost more than the tub itself. For a straightforward swap, many homeowners see totals in the high hundreds to low thousands. If the project needs plumbing changes, wall repair, or a new surround, costs can climb fast.
Here’s a practical cost breakdown format you can use when gathering quotes:
| Line item | What it covers | Why it changes cost |
| Tub unit | the fiberglass tub itself | size, quality tier, shape |
| Demo/disposal | removing old tub, hauling away | stairs, access, disposal fees |
| Plumbing adjustments | drain alignment, valve changes | old vs new layout, code needs |
| Wall repair | backer board, patching, waterproofing | hidden damage, mold/moisture |
| Surround/tiling | tub surround panels or tile | material choice, labor time |
If you are comparing quotes, ask what happens if the contractor finds wet framing or subfloor issues. That is where “surprise” money often goes.
Repair Vs Tub Refinishing Vs Replacement Cost To Result Logic
If you’re staring at a chip or crack, it’s tempting to search “quick fix” and hope for the best. Sometimes a simple fix really is enough.
A DIY patch kit can work for small chips and tiny hairline cracks when the tub feels solid underfoot and there is no soft spot. The surface still needs careful prep, and the color match may not be perfect, but it can stop water from getting into the damaged area.
Professional repair is useful when you need better color matching or the damage is in a noticeable spot. Pros also tend to shape and blend the repair more smoothly, so it is less obvious.
Tub refinishing (also called reglazing) is a cosmetic reset. It can make a worn fiberglass bathtub look new again, but the result depends on how sound the tub is underneath and how well the surface is prepared. If the base flexes, a new coating may fail sooner. If the tub is stable and the refinishing is done correctly, it can buy you more time.
Replacement is usually the smartest choice when the tub has widespread wear plus flexing, when cracks keep returning, or when there is hidden water damage around the tub. Hidden moisture around tubs is more than a cosmetic issue. According to the U.S. Centers for Disease Control and Prevention (CDC), persistent moisture can promote mold growth, which may affect indoor air quality and respiratory health. This is why repeated leaks, damp framing, or soft subfloor conditions around a fiberglass tub often justify full replacement rather than surface repair alone. In those cases, fixing the surface without fixing the structure is like painting over rotten wood.
Ten To Twenty Year Ownership Lens Total Cost Of Ownership
A helpful way to decide is to think in “years you want from this bathroom.”
If you plan to stay 15–20 years and the bathroom is high-use, paying more for an acrylic tub or another durable material can mean fewer repairs and less chance of replacing the tub twice. If you plan to sell in five years, replacing an ugly tub with a clean fiberglass tub may be a reasonable move.
A common real-life path looks like one of these. In some remodels, replacement also means removing the tub entirely and switching to a shower layout, which typically requires a properly sized shower pan as part of the conversion.
You replace fiberglass once in 15 years. That can happen when the first tub was builder-grade and the next install is better supported.
You refinish once, then replace. That often happens when the tub is structurally sound but ugly, and refinishing buys a few years before a full remodel.
Fiberglass Vs Other Bathtub Materials Choosing With A Checklist
Choosing a bathtub material is easier when differences are clear. This section compares fiberglass with acrylic, porcelain-on-steel, and premium materials based on daily use and long-term performance.
Fiberglass Vs Acrylic What Actually Changes Day To Day
The acrylic versus fiberglass bathtub decision is mostly about how the surface holds up.
Acrylic tends to keep a smoother, glossier look with normal cleaning. It often feels warmer for a bath. It also tends to resist scratching better in daily use, even though you can still damage it with harsh abrasives.
Fiberglass usually wins on being less expensive and easier to carry and install. If your project is on a tight budget or access is difficult, that matters.
Here is a clean acrylic vs fiberglass tub comparison:
| Category | Fiberglass tub | Acrylic tub |
| Price | lower | higher |
| Weight | lighter | a bit heavier |
| Surface wear | scratches/dulls sooner | stays glossy longer |
| Heat retention | lower | better |
| Best fit | light-use, rentals, quick swaps | long-term, daily use, soaking |
So, is fiberglass or acrylic better? For most owner-occupied homes aiming for long-term satisfaction, acrylic is often the better pick. For tight budgets, upstairs installs, or short timelines, fiberglass can still be a solid choice.
Fiberglass Vs Porcelain On Steel Chip Noise And Feel Tradeoffs
Porcelain-on-steel tubs have a hard surface that resists many scratches, but they can chip. If the steel gets exposed, rust can follow. They can also be noisy when water hits the surface, and they can feel cool.
Fiberglass tends to be quieter and lighter, but it is more likely to scratch and flex. If you hate the idea of chips and possible rust, fiberglass may feel safer. If you want a harder surface and don’t mind the cooler feel, steel can be appealing.
Fiberglass Vs Cast Iron And Solid Surface Premium Alternatives
Cast iron tubs are heavy, steady, and known for long life. They also tend to offer excellent heat retention. The downside is weight, cost, and the difficulty of getting them into the space. Some homes also need planning for load and framing.
Solid-surface and other premium tubs can look high-end and feel great, but they can be expensive and may need special care.
A simple way to think about it is a ladder: fiberglass for budget and weight, acrylic for a strong middle ground, cast iron for premium longevity if your home and budget can handle it.
Installation And Support The Number One Controllable Factor For Durability
If fiberglass tubs have a “secret,” it’s this: support matters as much as the tub itself.
What Proper Fiberglass Bathtub Installation Should Include
A good install starts with a level base and correct framing so the tub sits evenly. The drain must align without forcing the tub into position. The tub flange must tie into the waterproofing plan so water can’t sneak behind the surround.
Most important, the tub floor needs support so it doesn’t flex. Some manufacturers call for a mortar bed or another approved support method under the base. This is not just a nice extra. It helps prevent stress cracks and keeps the tub feeling solid.
If you’re hiring this out, it’s fair to ask how they plan to support the tub floor and whether they will follow the manufacturer’s instructions exactly. That is also where warranty issues can come up.
Mortar Bed And Base Support When It Matters Most
Support matters most when the subfloor is not perfectly flat, when the tub has a large floor area that people stand on, and when the bathroom is upstairs, where floor bounce is more noticeable.
If your old tub squeaked, or if the caulk line kept cracking where the tub meets the wall, those can be signs the tub moved. Movement often starts underneath.
Signs Your Tub Was Not Installed Or Supported Correctly
If you want a quick self-check, step into the tub (carefully) and shift your weight near the center. A little movement can be normal with some materials, but a clear “dip” or springy feel is a red flag.
You may also notice squeaks, new or growing cracks, or repeated caulk failure at the tub-to-wall joint. Caulk that keeps splitting is sometimes blamed on “bad caulk,” but movement is often the real cause.
Questions To Ask A Contractor To Prevent Early Failure
Use these questions to protect yourself before the tub goes in, because fixes are harder after tile or a surround is installed.
-
How will you support the tub floor to prevent flexing?
-
Will you install it exactly to the manufacturer’s instructions?
-
How will waterproofing connect to the tub flange and the tub surround?
-
What will you do if you find moisture damage or mold behind the old tub?
Cleaning Maintenance And Preventing Early Wear
A fiberglass tub can stay nice longer, but it needs a gentle approach. If you grew up scrubbing a porcelain tub with gritty powder, this is a different game.
Safe Cleaning For Gelcoats What To Use And What To Avoid
The goal is to clean without scratching the gelcoat.
Use mild, non-abrasive cleaners and soft cloths or soft sponges. Rinse well. Drying with a towel after cleaning helps reduce mineral spotting, especially if you have hard water.
What should not be used on a fiberglass tub? In general, avoid abrasive powders, rough scouring pads, and strong solvents that can dull or soften finishes. In addition to surface damage, chemical safety matters. The U.S. Occupational Safety and Health Administration (OSHA) warns that improper use or mixing of household cleaning chemicals can release hazardous fumes or cause skin and respiratory irritation. Using mild, non-abrasive cleaners as directed helps protect both the fiberglass gelcoat and the people using the bathroom. Also be cautious with “scratch eraser” type pads because they work by micro-abrasion, which can turn shine into haze over time.
Here is a simple compatibility table:
| Cleaner/tool type | Fiberglass tub safety | Why |
| Mild dish soap + soft sponge | Safe | low abrasion |
| Non-abrasive bathroom spray | Usually safe | made for finishes |
| Baking soda paste | Caution | mild grit can haze gelcoat |
| Abrasive powders/scouring pads | Avoid | scratches gelcoat |
| Strong solvent cleaners | Avoid | can damage or dull surface |
Stain Removal Playbook Soap Scum Hard Water And Rust Marks
If you see stains, start with the least aggressive method. Many fiberglass problems get worse because people scrub harder and harder, which scratches the surface and makes staining easier later. Medical literature summarized by the National Center for Biotechnology Information (NCBI), part of the U.S. National Institutes of Health (NIH), notes that repeated exposure to harsh cleaning chemicals can irritate skin and airways, especially in poorly ventilated spaces like bathrooms. This reinforces the importance of starting with the least aggressive stain-removal methods on fiberglass tubs.
For soap scum, a warm soak with a mild cleaner and time often works better than force. For hard water deposits, you may need a cleaner meant for mineral buildup, but always test in a small hidden spot first. Rust marks often come from metal cans, shaving cream bottoms, or old fixtures dripping; removing the source matters as much as removing the stain.
If stains keep returning in the same area, ask yourself a key question: is the surface still smooth there, or is it worn and slightly rough? A rough area holds onto grime like a dirty sponge.
Preventing Scratches Dulling And Discoloration
Small habits make a big difference. Rinse the tub after use if you can. Avoid leaving bottles with metal bottoms or gritty residue sitting on ledges. If you use a bath mat, choose one that doesn’t trap grit underneath, and lift it to clean below it.
If you bathe pets, trim nails first and consider using a towel in the tub to reduce scratching. Many people are surprised how fast pet nails can mark a gelcoat surface.
What Is The Best Cleaner For A Fiberglass Tub
The best cleaner is usually a non-abrasive, mild cleaner used with a soft cloth or sponge. If you need more power, pick a cleaner labeled as non-scratch and test first. The safest approach is gentle cleaning more often, instead of harsh scrubbing once stains are set.
FAQs
1. Are fiberglass bathtubs any good?
Fiberglass bathtubs can be a good choice in the right situations. They work best in light-use bathrooms, such as guest baths or secondary bathrooms, where wear is limited. Because fiberglass is lightweight, it’s also helpful in homes with narrow staircases, upstairs bathrooms, or remodeling projects where moving a heavy tub would be difficult or expensive.
That said, fiberglass bathtubs are generally less durable than acrylic tubs. Over time, the surface can scratch, dull, or stain more easily, especially in busy family bathrooms or daily shower use. If long-term durability and a consistently glossy finish matter most, fiberglass may feel like a short-term solution rather than a forever option.
2. Do they still make fiberglass bathtubs?
Yes, fiberglass bathtubs are still widely manufactured and commonly installed today. They remain popular in budget-friendly bathroom remodels, rental properties, and standard tub-and-shower combinations. Many builders and remodelers continue to use fiberglass because it’s affordable, easy to transport, and available in common sizes that fit existing bathroom layouts without major changes.
While higher-end remodels may favor acrylic or cast iron, fiberglass continues to be a mainstream option for practical, cost-controlled bathroom projects.
3. Is a fiberglass or acrylic tub better?
For most long-term, daily-use bathrooms, an acrylic tub is usually the better choice. Acrylic surfaces tend to feel warmer, hold heat better during baths, and stay glossy longer with normal cleaning. They also resist scratches and wear more effectively over time, which makes them well suited for primary bathrooms and family use.
Fiberglass tubs, on the other hand, are often better when budget and weight are the top priorities. If you’re remodeling quickly, working with limited access, or upgrading a lightly used bathroom, fiberglass can still be a practical and functional option.
4. What should not be used in a fiberglass tub?
You should avoid abrasive powders, gritty cleansers, and rough scouring pads on a fiberglass tub. These products can scratch or dull the gelcoat surface, making the tub look worn and causing it to attract stains more easily. Harsh solvent cleaners can also damage or soften the finish over time.
Instead, use mild, non-abrasive bathroom cleaners with a soft cloth or sponge. Gentle, regular cleaning helps preserve the surface and extend the life of a fiberglass bathtub.
5. How do I tell if I have a fiberglass or acrylic tub?
A fiberglass tub often sounds more hollow when tapped and may flex slightly underfoot, especially near the center or drain area. The surface may also feel cooler to the touch. If you can see the underside through an access panel, fiberglass tubs often show rougher backing with visible fibers and resin.
An acrylic tub usually feels warmer and more solid when you stand in it. The underside, if visible, tends to look more uniform and reinforced rather than fibrous. If you’re still unsure, a plumber or remodeling professional can usually identify the material quickly once access is available.
References
Leave a comment
This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.